PVH Propeller Fan Peerless

PVH Propeller Fan | Axial Propeller Fan

The Peerless Blowers PVH Propeller Fan | Axial Propeller Fan is a heavy-duty, single or dual speed axial propeller fan, equipped with permanently lubricated bearings, integral fan guard, and balanced aluminum blades.

It is suitable for clean air applications.

  • High Volume Ventilation
  • Optional Variable Speed Controller
  • 3 Models, 2,400 to 6,200 CFM, max 0.75" SP
  • Heavy-Duty Mounting Panel

Technical Specifications


Clean Air, Large Space Ventilation Applications:

  • Commercial Kitchens
  • Laundries
  • Large Assembly Rooms
  • Equipment Rooms
  • Farm Buildings
  • AIRFLOW: Clean Air from 2,400 CFM to 6,200 CFM, up to 0.75" SP.  
  • SIZE FORMAT: Panel Mount. 
  • PROPELLER: Axial Propeller, Aluminum Blades. Diameters 16" to 20".  
  • DRIVE: Direct Drive. High Efficiency, TEAO, 120 to 480VAC Single or Three Phase, NEMA Frame Size Motors. Single or Dual Speed.  
  • TEMPERATURES: 40°C / 104°F Max. 
  • INLET: Square Mounting Panel 34" H x 34" W to 66" H x 66" W. 
  • OUTLET: Circular Through-Panel Outlet. 
  • CONSTRUCTION: Steel Sheet, Gray Powder-Coated Finish. Indoor / Outdoor, Heavy-Duty. 
  • SPARK RESISTANCE: Not available for this series. 
  • ​​APPROVALS: ISO-9001 Certified Shop. AMCA Accredited In-House Test Laboratory. 
Available Models
PVH-16 16 2975 1⁄2 0.37 24 24 1750 1⁄2
PVH-18 18 4250 3⁄4 0.62 26 26 1750 5⁄8
PVH-20 20 6200 3⁄4 1.15 28 28 1750 5⁄8





Peerless' Propeller Fan PVH series provides single or dual-speed fractional horsepower motors, rigid steel mounting panels, and integral safety guards for heavy commercial applications.

Our panel-mount fans include an aluminum blade assembly, dynamically balanced for efficient airflow at quiet volumes.

  • High-Grade Aluminum Blades.
  • Carbon Steel Hubs.
  • Low Weight, High Efficiency Design.

Mounting Panel
Square, rigid steel mounting panels allow for either framed-in or surface mounting on walls or ceilings. Fan can be mounted in either a horizontal or vertical orientation.

  • Single-Piece Panel.
  • Four Pre-Drilled Mounting Holes.
  • Powder-Coated Finish.
  • Horizontal or Vertical Orientation.

All models include a totally enclosed air-over (TEAO) motor with pre-lubricated, sealed ball bearings that allows installation in any position.

  • Fractional Horsepower Motors.
  • Long Service Hour Duty.
  • Terminal Wiring Box Onboard.

Fan Guard
With safety in mind, these panel fans include an integral motor-fan guard constructed of heavy-duty corrosion-resistant solid round bar.

  • Finger- and Animal-Safe.
  • Removable for Easy Fan Access.
  • Corrosion-Resistant Bar.

Peerless' Propeller Fan PVH series is available in a Panel Mount format.

Panel Mount
Panel Mounting uses a flat sheet metal base as the frame for the fan's components. This square panel includes four pre-drilled bolt holes, and is mounted by fastening to a flat wall, ceiling, or roof surface (check each model for acceptable orientations). The fan can be framed into an opening, surface-mounted, or mounted to a curb.

  • Direct Drive.
  • Pre-lubricated Sealed Ball Bearings.
  • Four 3⁄8" Mounting Holes.

Optional speed control, safety, and performance features allow Peerless' Propeller Fan PVH series to fit into any number of custom applications.

Speed Controller
The optional Variable Speed Controller adds a field-mounted dial for users to set desired anti-stall and / or minimum fan speeds.

  • User-Settable Speed Control.
  • Installs Near Fan for Easy Access.
  • Wires In-line with Supply Power.

Discharge Shutters
To protect against weather and back-draft entry into the building through the fan housing, Discharge Shutters can be provided to mount onto the exterior building surface.

  • Hold Out Weather.
  • Corrosion-Resistant Construction.
  • Manual or Automatic Operation.

Discharge Guard
For applications where the discharge end of the fan is exposed to personnel, a heavy-duty expanded metal safety guard can be provided to restrict incidental access to the fan blades.

  • Heavy-Duty Expanded Metal Guard.
  • Improves Safety and Reliability.
  • Fully Encloses the Fan Blades.

Reverse Flow
Allowing the fan to serve as a make-up fan instead of an exhaust fan, a special reverse-flow blade and motor set can be configured for pulling air into the space.

  • Exhaust or Make-Up Airflow Options.
  • No Loss in Performance.
  • No Special Wiring or Controls Needed.

Peerless can provide nearly any special motor specification, including multi-speed windings, stainless steel casings, washdown and other environmental ratings, inverter duty, explosion proof, IEC and other frame sizes, and more.

  • Any Compatible Motor Can Be Provided.
  • Domestic or International Frames.
  • Special Environment Ratings.


Heritage Products Catalogs | Axial Propeller Fans

Axial Propeller Fans | PVH

Sign in to download

Fan Selector

Our online fan selection tool will help you identify a suitable model for your application's requirements and let you create a submittal.

Start Fan Selection

Contact our Sales Team


Frank Mueller

Director of Sales - Americas

Phone: +1.828.270.0343
Mobile: +1.828.855.5446
E-Mail: frank.mueller@punker.com


T.J. King

Senior Sales Manager

Phone: +1.828.622.7500
Mobile: +1.828.206.1512
E-Mail: TJKing@PeerlessBlowers.com


Lisa Elkins

Inside Sales Manager

Phone: +1.828.622.7500
E-Mail: LElkins@PeerlessBlowers.com


Heather Sawyer

Inside Sales Manager

Phone: +1.828.622.7500
E-Mail: HSawyer@PeerlessBlowers.com


Gary Smith

Territory Sales Manager - Northeast

Phone: +1.828.622.7500
Mobile: +1.404.693.0052
E-Mail: GSmith@PeerlessBlowers.com


Edgardo Rojas

Sales Representative - Mexico

Phone: +52.442.595.8285
E-Mail: edgardo.rojas@punker.com


Joshua Meares

Area Sales Manager - Southwest

Mobile: +1.980.342.0432
E-Mail: joshua.meares@peerlessblowers.com


Michael Burdukovsky

Area Sales Manager - Southeast USA

Phone: +1.828.622.7500
Mobile: +1.980.342.0941
E-Mail: Michael.Burdukovsky@PeerlessBlowers.com

Contact Us!

I hereby consent to the storage and processing of my personal data. I have read and taken note of the following information on the processing of my personal data and on data protection.